On Wed, 18 Oct 2006 12:11:55 -0500 Kent Stevens <firstname.lastname@example.org> wrote: > There was some brief talk about adding acpi thermal zone selection to > the temperature module on irc a few days back. I ground this out > which should work for the relatively generic naming convention which > lies within /proc/acpi/thermal_zone/. I tested it out on the laptop > which has 3 sensors (TZ0 TZ1 TZ2), and another box which has none > (uses lm_sensors) without any difficulties. I'm still curious as to > what other naming conventions are lurking about in people's > thermal_zone's. My /proc/acpi/thermal_zone/ is empty and I use lm_sensors. This patch doesn't make any difference for me. The temperature module gives me a choice of three, but I have four temps on my mother board, and the missing one is the CPU temperature that I actually want. ASUS A7V333 motherboard, AMD Athlon 3000+ with Barton core, SuSE Linux 9.3 Pro. dvs1@cluster:/proc/acpi/thermal_zone> sensors LG PAL_BG -i2c-4-61 Adapter: bt878 #0 [sw] asb100-i2c-0-2d Adapter: SMBus Via Pro adapter at e800 VCore 1: +1.66 V (min = +1.57 V, max = +1.73 V) +3.3V: +3.26 V (min = +3.14 V, max = +3.47 V) +5V: +4.81 V (min = +4.76 V, max = +5.24 V) ALARM +12V: +12.40 V (min = +10.82 V, max = +13.19 V) -12V (reserved): -12.96 V (min = -0.00 V, max = -0.00 V) -5V (reserved): -5.44 V (min = -0.00 V, max = -0.00 V) CPU Fan: 4066 RPM (min = 1997 RPM, div = 4) Chassis Fan: 0 RPM (min = 3994 RPM, div = 2) Power Fan: 0 RPM (min = 3994 RPM, div = 2) M/B Temp: +30°C (high = +45°C, hyst = +40°C) CPU Temp (Intel): +62°C (high = +60°C, hyst = +50°C) Power Temp: +14°C (high = +45°C, hyst = +40°C) CPU Temp (AMD): +75°C (high = +60°C, hyst = +50°C) vid: +1.650 V (VRM Version 9.0) alarms: CPU Temp (AMD) is the one I want.
Description: PGP signature